Product : NAK80 Plastic Mould Steel
Kategori : Precipitation Hardening Steel
Standard: JIS
Grades : NAK80
Equivalent
AISI P21, GB/T 10Ni3MnCuAl, ASTM A681
Characteristic
- High precision, high mirror & surface polish
- Super clean, Vacuum-Arc Remelted steel with uniform grain structure
- Age-hardened for uniformity of hardness throughout, even in heavy sections.
- Uniform microstructure & hardness approximately 40 HRC
- Excellent dimensional stability
- When welded, NAK leaves no witness lines after re-aging.
- Uniform grain structure with no pin holes, inclusions or hard spots.
- Machines up to 20% faster than 30 HRC P20 mold steels.
- Never needs stress relieving, even after heavy machining.
- Polishes to a superior No. 1 finish, even over welded areas, etc
Related Product
- Perbandingan Steel 2316, 2311 & 2083
- Jual Material Stavax
- Tabel Persamaan Hitachi Steel
- Thyssenkrupp Steel Standar Comparison
- Jual Baja 2311 |AISI P20| W330| GB 3Cr2Mo| PX4 Mould Steel
- Daido Steel Standar Comparison
- Daido Steel Product List
- HSS Steel Grade & equivalent
Availability
Roundbar
Flat
Chemical Composition NAK80, 10Ni3MnCuAl & P21 Mold Steel
| Grade | C | Si | Mn | Ni | Cu | Mo | Al |
| NAK80 | 0.15 | 0.30 | 1.50 | 3.00 | 1.00 | 0.30 | 1.00 |
| 10Ni3MnCuAl | 0.06-0.16 | 0.40 | 1.4-1.7 | 2.7-3.3 | 0.8-1.2 | 0.2-0.5 | 0.7-1.2 |
| P21 | 0.18-0.22 | 0.2-0.4 | 0.2-0.4 | 3.90-4.25 | 0.2-0.3 | 0.15-0.25 | 1.05-1.25 |
Mechanical Properties
| Properties | NAK80 | |
| Tensile Strength (Psi) | 183,400 | |
| Yield Strength (Psi) | 147,600 | |
| Elongation in 2" (%) | 16.1 | |
| Hardness (HRc) | 40 | |
| Reduction of Area (%) | 41.9 | |
| Charpy V-notch Impact Strength (toughness): | ||
| Longitudinal (ft/lb) | 8.1 | |
| Transverse (ft/lb) | 8.5 |
Physical Properties
| Properties | NAK80 | |
| Density (×1000 kg/m3) | 7.72 | |
| Modulus of elasticity (Psi) | 30.0 x 10-6 | |
| Thermal conductivity (100oC) [W/m.K] | 41.3 | |
| Maximum Magnetic Permeability | 380 | |
| Saturated Magnetism (Gauss) | 16,360 | |
| Residual Magnetism (Gauss) | 8,500 | |
| Coercive force (Oersted) | 14.0 |
Application
Plastic molds, High-mirror polish mold, Precision long run mold, rubber molds, jigs & fixtures, and press dies. etc
Referensi:
http://www.daido.co.jp/en/products/tool/pla.html
| Related Steel: | |||||
 |
 |
 |
 |
 |
 |
Incoming Search Terms: jual baja nak80, material nak80 p20 steel, jual plastic mould steel, steel nak55, material PX4 datasheet nak55, equivalen sks3 steel, mechanical properties sks3,physical properties sks3,sks3 steel properties, baja O1, baja din 1.2510