Characteristic
S50C steel JIS G4051 is one mainly of high carbon steel, for the high strength medium carbon steel, the cold-work plasticity is low, the welding performance, the hardenability are bad, but non-temper brittleness, cutting value still permissible. Generally under the normalizing or quenching,the tempering uses,uses in making the resistance to wear to request high,moves the load and the stock effect not big mechanical job and the spring like forges the gear,the tension bar,the roller,the axis,the agriculture use to excavate the plough-share,the heavy load spindle and so on.
Equivalent S50C
AISI 1050, DIN CK50, ASSAB 760, NS 1050, SAE J 403-AISI, UNI 7846,BS 970, UNE 36011
Availability
Plate Thk. 6-50mmEquivalent S50C
AISI 1050, DIN CK50, ASSAB 760, NS 1050, SAE J 403-AISI, UNI 7846,BS 970, UNE 36011
Availability
Sizes: 4ft x 8ft
Chemical Composition
| C | Si | Mn | P | S | Cr | Ni | Cu | |
| 0.47-0.53 | 0.15-0.35 | 0.60-0.90 | 0.035 Max | 0.035 Max | 0.25 Max | 0.25 Max | 0.25 Max |
Mechanical Properties
| Properties | S50C | |
| Tensile Strength (MPa) | ≥ 630 | |
| Yield Strength (MPa) | ≥ 375 | |
| Elongation Ratio (%) | ≥ 14 | |
| Reduction of Area (Psi) | ≥40 | |
| Impact Merit AKV (J) | ≥31 | |
| Resilient value AKV(J/cm2) | ≥39 | |
| Hardness (HB) | ≤241 | |
| Annealed (HB) | ≤207 |
Application
Backing plates, punch holders (jigs), die holders (fixtures) guide plates (simple bending dies), (simple structural components),etc.
| Related Machinery Steel Product: | |||||
 |
 |
 |
 |
 |
 |
| Incoming search terms: plat S55C, equivalent DIN CK50, steel ASSAB 760 equivalent, plat S50C, Harga steel AISI 1050, catalog AISI, Spesifikasi besi plat 1050, jual plat S50C, baja S50C, Ukuran as S50C, agen as AISI 1050, steel 1050 width, AISI roundbar 6m,steel S50C plate, S50C rod, |
